How to Replace a Spindle on a Gravely Mower – Ultimate Guide

If you’re a Gravely mower owner, then you know that these machines are built to last. But like any machine, they will eventually need some maintenance and repairs. One of the most common repairs is replacing a spindle on the mower deck.

This can be a tricky repair, but with our step-by-step guide, you’ll have your Gravely mower back up and running in no time!

  • Disconnect the spark plug wire from the spark plug to prevent the engine from accidentally starting while you are working
  • Raise the mower deck to its highest position using the deck adjustment lever
  • Remove the belt cover from the side of the mower deck by removing the screws that hold it in place
  • Inspect the spindle for wear and tear, and if necessary, replace it with a new one
  • Reattach the belt cover and screw it back into place
  • Lower the mower deck to its lowest position and reconnect the spark plug wire to the spark plug

How Do I Know If My Spindle is Bad on My Riding Mower?

Over time, the spindle on your riding mower will naturally wear down. However, there are a few signs that can indicate that your spindle is bad and needs to be replaced. If you notice that your blades are not cutting evenly, this is a sign that the spindle is not spinning correctly.

Uneven cuts can also be caused by dull blades, so be sure to check those as well. Another indication of a bad spindle is if you hear strange noises coming from the deck of your mower while it’s running. These noises will usually sound like grinding or metal scraping.

If you suspect that your spindle is bad, the best course of action is to take it to a professional for repair or replacement. Trying to fix it yourself could result in further damage to your mower.

How Do You Remove a Pulley Spindle from a Lawn Mower?

If you need to remove the pulley spindle from your lawn mower, there are a few things you’ll need to do. First, disconnect the spark plug wire so that the engine can’t start while you’re working. Next, use a socket wrench to loosen the bolt that secures the pulley spindle to the deck of the mower.

Once that bolt is loosened, you should be able to pull the spindle out of its housing. Finally, clean any debris or grass buildup from around the housing before reinserting and tightening the bolt on the spindle.

Can You Over Grease Mower Spindles?

No, you cannot over grease mower spindles. Greasing the spindles regularly helps to keep them lubricated and running smoothly.

How Do I Change the Spindle Bearings on My Mower Deck?

If you want to change the spindle bearings on your mower deck, you will need to follow these steps. First, remove the old bearings from the spindle. Next, clean the area around the spindle so that the new bearings can be installed properly.

Then, press the new bearings into place and reinstall the spindle onto the deck. Finally, tighten all of the nuts and bolts to secure everything in place.

Replace Spindle on Gravely Zero Turn Mower

It’s that time of year again. The grass is growing and your Gravely zero turn mower needs a new spindle. This is a relatively easy repair that anyone with basic mechanical skills can do.

Here’s how: 1. Park your mower on a level surface and disconnect the spark plug wire to prevent accidental starting. 2. Raise the deck to its highest position using the deck lift lever.

3. Remove the blade bolts with a socket wrench and carefully remove the blades from the spindle assembly. Be careful not to damage the blades or spindle housing. 4. Use a wrench to remove the nuts holding the spindle in place, then carefully pull the old spindle out of the housing.

Inspect it for wear or damage and replace it if necessary. 5. Insert the new spindle into the housing and tighten down the retaining nuts with a wrench..

Placetheblades back onto the spindles, being sure they are installed correctly (consult your owner’s manual for guidance).

Gravely Spindle Assembly

The Gravely Spindle Assembly is a vital part of your Gravely lawn mower. It is responsible for holding the blade in place and allowing it to rotate. If your spindle assembly is not working properly, it can cause damage to your lawn mower and make it difficult to cut your grass.

Gravely Zt 42 Spindle Assembly

If you’re looking for a Gravely Zt 42 Spindle Assembly, you’ve come to the right place. Here at, we have everything you need to keep your Gravely lawn mower in tip-top shape. The Gravely Zt 42 is a great lawn mower, but like all machines, it needs occasional maintenance and replacement parts.

The spindle assembly is one of the most important parts of the mower, and it’s crucial that it be in good working order. Replacing a spindle assembly is not as difficult as it might sound. With a little bit of know-how and the right tools, you can do it yourself in no time.

We carry a wide selection of replacement spindle assemblies for all makes and models of Gravely lawn mowers, so finding the right one for your mower is easy. Once you have the new spindle assembly installed, regular maintenance will help ensure that it lasts for years to come. Be sure to check the blades often and sharpen or replace them as needed.

Keeping your Gravely Zt 42 running like new is easy with!

Gravely Zero Turn Spindle

If you’re in the market for a new lawn mower, you may be considering a Gravely zero turn mower. These mowers are designed for commercial use, and they offer many benefits over traditional riding lawn mowers. One of the most notable features of Gravely zero turn mowers is their spindle design.

Gravely zero turn mowers feature two independent spindles that provide power to the wheels. This design allows the operator to make sharp turns without damaging the turf. The Gravely company offers a variety of different models that vary in terms of size and horsepower.

So, there’s sure to be a model that’s perfect for your needs. When it comes to maintaining your lawn, a Gravely zero turn mower can save you time and money. With its ability to make quick turns, you’ll be able to avoid missed patches of grass when mowing around obstacles like trees and shrubs.

How to Remove Pulley from Spindle Shaft

If you need to remove a pulley from a spindle shaft, there are a few things you’ll need to do. First, use a wrench to loosen the set screw that’s holding the pulley in place. Once the set screw is loose, you should be able to slide the pulley off of the shaft.

If the pulley is stuck, you may need to tap it gently with a hammer to get it moving. Once the pulley is off, inspect the shaft for any damage. If there are any nicks or gouges, you’ll need to smooth them out before reinstalling the pulley.

To do this, use a file or some sandpaper to lightly buff away any roughness. When you’re ready to put the pulley back on, line up the set screw hole with the slot in the shaft. Slide the pulley into place and then tighten down the set screw using your wrench.

Be sure not to overtighten – just snug it up until it’s tight enough that it won’t move around when you spin the shaft.

Gravely Spindle Rebuild

Gravely spindles are an important part of the Gravely mower. They provide the power to rotate the blades and allow the mower to move forward. Over time, however, they can become worn down and need to be rebuilt.

The process of rebuilding a Gravely spindle is not difficult, but it does require some knowledge of mechanics. First, you will need to remove the old spindle from the mower. Next, you will need to clean all of the parts that will be reused in the new spindle.

Once everything is clean, you can begin assembling the new spindle. Be sure to follow the instructions that come with your rebuild kit carefully. If done correctly, your new Gravely spindle should last for many years of use.

Gravely Ztx 52 Spindle

If you’re looking for a powerful and versatile zero-turn mower, the Gravely ZTX 52 is a great option. This mower has a 52″ cutting deck and is powered by a 23 hp Kawasaki engine, making it ideal for large lawns. It also features a hydrostatic transmission, which makes it easy to operate.

Plus, with a top speed of 9 mph, you’ll be able to get the job done quickly.

Gravely Spindle Pulley

If your Gravely lawn mower isn’t cutting grass like it used to, the problem might be with the spindle pulley. The spindle pulley is responsible for spinning the blade, so if it’s not working properly, the blade won’t spin and the lawn mower won’t cut grass. Fortunately, you can replace the spindle pulley yourself without having to take your lawn mower to a repair shop.

Here’s how: 1. Disconnect the spark plug wire from the spark plug so that the engine can’t start accidentally while you’re working on it. 2. Remove the deck of the lawn mower by loosening the bolts that hold it in place.

3. Take off the old spindle pulley by removing the retaining nut and washer with a wrench or socket set. Pull off the old pulley and discard it. 4. Put on a new spindle pulley by reversing these steps – put on a new retaining washer and nut, then slide on the new pulley until it’s snug against them both.

Be sure to tighten down both securely with a wrench or socket set so that they don’t come loose while you’re using the lawn mower!


If you’re a Gravely mower owner, chances are you’ll need to replace a spindle at some point. Here’s a step-by-step guide on how to do it: 1. Start by removing the old spindle.

This can be done by disconnecting the blades and lifting them out of the way. Then, remove the bolts that hold the spindle in place. 2. Next, install the new spindle.

First, connect the blades (if they’re not already connected). Then, bolt the new spindle into place using the same holes as the old one. 3. Finally, test out your work by starting up the mower and making sure everything is working correctly.

If all goes well, you should be good to go!

Rate this post

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top