How to Recoil a Lawn Mower Spring: Step-by-Step Guide

how to recoil a lawn mower spring

Do you have a lawn mower with a faulty recoil spring? Don’t worry, you’re not alone! Recoil springs in lawn mowers can wear out over time, causing the pull start mechanism to malfunction. It can be frustrating, especially when you’re in the middle of mowing your lawn and suddenly the engine won’t start. But fear not! Recoiling a lawn mower spring is a relatively simple task that you can do it yourself with just a few tools and a little bit of patience.

Think of it as similar to stretching a rubber band back into shape. In this blog post, we will guide you through the process of recoiling a lawn mower spring step-by-step, so you can get your mower up and running in no time. We’ll cover everything from the tools you’ll need to the specific techniques you can use to make the task easier.

So let’s dive in and learn how to recoil a lawn mower spring!


If you’re a DIY enthusiast, one task you might come across is recoiling a lawn mower spring. While it may seem like a daunting task, with a little know-how, it can be done at home without much hassle. The lawnmower spring is responsible for helping to start the engine by producing the necessary tension.

Over time, it can become worn out or break, requiring replacement or recoiling. Recoiling involves rewinding the spring so that it can produce the necessary tension again. In this blog post, we’ll guide you through the process of recoiling a lawn mower spring step by step, making it easier for you to get your mower up and running again in no time.

So grab your tools and let’s get started!

What is a lawn mower spring and why does it need to be recoiled?

lawn mower spring, recoiled, introduction

how to recoil a lawn mower spring

Tools and Materials Needed

When it comes to recoiling a lawn mower spring, you’ll want to make sure you have the right tools and materials on hand. First, you’ll need a pair of safety goggles to protect your eyes from any flying debris. You’ll also need a pair of work gloves to protect your hands.

In terms of tools, you’ll need a socket wrench with the appropriate size socket to fit the bolts on the lawn mower. You’ll also need a set of pliers to help manipulate the spring. Finally, you’ll need a new spring to replace the old one that’s causing the problem.

Once you have all of these tools and materials ready, you can start the process of recoiling the lawn mower spring.

List of tools and materials required for recoiling a lawn mower spring

When it comes to recoiling a lawn mower spring, having the right tools and materials is essential. Here is a list of what you’ll need to get the job done: Safety goggles: It’s important to protect your eyes while working with springs, as they can be under tension and may snap back unexpectedly.

Work gloves: Thick gloves will provide protection for your hands while handling the spring and any other sharp objects.

Spring compressor: This tool is used to safely compress and hold the spring in place while you work on it. It ensures that the spring doesn’t unwind while you’re recoiling it.

Vice grip or C-clamp: This will hold the spring compressor in place, providing stability and preventing any movement while you’re recoiling the spring. Adjustable wrench: This tool is useful for loosening and tightening nuts and bolts on the lawn mower.

Wire brush: Before recoiling the spring, it’s a good idea to clean it using a wire brush. This will help remove any dirt or rust that may have accumulated over time.

Lubricant: Applying a small amount of lubricant to the spring will help it move smoothly and prevent any squeaking or sticking.

Step-by-Step Guide

When it comes to maintaining your lawn mower, one task that may need to be done is recoiling the spring. The spring is responsible for powering the engine by providing tension to the pull start mechanism. Over time, the spring may become loose or break, causing issues with starting your mower.

Recoiling the spring can be a bit tricky, but with a step-by-step guide, you’ll have your mower up and running in no time. Step 1: Start by disconnecting the spark plug wire to ensure your safety. This will prevent the engine from accidentally starting while you’re working on it.

Step 2: Locate the housing cover on the top of the engine. This is usually held in place with screws or bolts. Remove these fasteners using a wrench or screwdriver.

Step 3: With the housing cover removed, you’ll now be able to access the spring. Take note of how the spring is currently situated so you can place it back correctly later. Step 4: Carefully unwind the spring using a pair of pliers.

Pay attention to how many times you turn the spring as this will determine the tension it provides when recoiled. Step 5: Once the spring is completely unwound, take this opportunity to inspect it for any signs of damage or wear. If the spring is broken or damaged, it will need to be replaced.

Step 6: If the spring is still in good condition, it’s time to recoil it. Start by hooking one end of the spring back onto the designated spot in the housing cover. Be sure to position it the same way it was before you removed it.

Detailed instructions on how to recoil a lawn mower spring

If you’re a DIY enthusiast and have a lawn mower that won’t start, it’s likely that the recoil spring is the culprit. Recoil springs can become loose or break over time, causing the pull cord to lose tension. But don’t worry – recoiling a lawn mower spring can be done at home with a few simple steps.

Step 1: Start by disconnecting the spark plug wire to ensure safety. This will prevent accidental starting of the mower while working on it. Step 2: Locate the recoil housing.

This is usually a plastic cover on top of the engine that houses the recoil spring. Depending on the model of your lawn mower, you may need to remove a few screws or clips to access it. Step 3: Once the recoil housing is removed, you will see the recoil spring inside.

Carefully unwind the existing spring if it is still intact. Make sure to note the direction of the wind so that you can install the new spring correctly. Step 4: Purchase a replacement recoil spring from a hardware store or online.

It’s important to get the correct size and type for your specific model of lawn mower. Step 5: Install the new recoil spring by first attaching it to the starter pulley. This is the part that the pull cord wraps around.

Use a pair of pliers to secure the spring to the pulley, making sure it is tightly wound. Step 6: Wind the spring back into the recoil housing in the same direction as the old spring. Use caution and keep a firm grip on the spring to prevent it from flying out unexpectedly.

Safety Precautions

If you’re looking to recoil a lawn mower spring, it’s important to take some safety precautions beforehand. First and foremost, make sure the lawn mower is turned off and the spark plug is disconnected. This will prevent any accidental starts or electrical shocks.

Next, wear protective gloves and eyewear to shield yourself from any potential injuries. Springs can be under a lot of tension, so it’s crucial to handle them with care. When recoiling the spring, use a pair of pliers or a spring compressor tool to secure it in place.

This will prevent the spring from suddenly releasing and potentially causing harm. Remember, safety should always be your top priority when working with any machinery.

Important safety measures to follow while recoiling a lawn mower spring

“Lawn mower maintenance can be a daunting task, especially when it comes to recoiling the spring. However, by following a few important safety measures, you can ensure that the process is done smoothly and without any accidents. First and foremost, always wear protective gear such as gloves and safety glasses.

This will protect your hands and eyes from any potential injuries. Additionally, make sure to disconnect the spark plug wire to prevent the engine from accidentally starting while you’re working on the spring. It’s also crucial to release any tension from the spring slowly and gradually to avoid sudden releases or recoil injuries.

Lastly, always work in a well-ventilated area to avoid inhaling any harmful fumes. By following these safety precautions, you can safely and effectively recoiling a lawn mower spring without any worries.”

Common Issues and Troubleshooting

If you’re experiencing issues with your lawn mower’s spring and need to recoil it, don’t worry – you’re not alone. Recoiling a lawn mower spring can be a tricky task, but with a little know-how, you’ll have it up and running in no time. First, make sure you have the appropriate tools on hand, such as a pair of pliers or a spring winding tool.

To begin, locate the spring and carefully release any tension it may have by removing any clips or retaining rings. Next, use your pliers or winding tool to wind the spring back into its original position, being sure to wind it tightly and evenly. Finally, reattach any clips or retaining rings and test the spring by pulling the starter cord.

If it recoils properly, you’re good to go. If not, you may need to repeat the process or seek professional assistance. Remember, patience and attention to detail are key when dealing with lawn mower springs.

Troubleshooting tips for common problems encountered during spring recoiling process

“Troubleshooting tips for common problems encountered during spring recoiling process” When it comes to spring recoiling, it’s not uncommon to encounter a few bumps along the way. But don’t worry, because with a little troubleshooting know-how, you’ll be able to navigate these issues and get right back on track. One common issue that people experience is the spring becoming loose or losing tension after recoiling.

This can happen if the spring is not wound tightly enough or if it has been overextended. To fix this, you can try adjusting the tension by winding the spring tighter or replacing it altogether. Another common problem is the spring becoming stuck or jammed during the recoiling process.

This can occur if there is debris or dirt in the spring mechanism. In this case, it’s important to clean the area thoroughly and ensure that everything is free from obstruction. If these troubleshooting tips don’t solve the issue, it may be necessary to seek the help of a professional.

Remember, patience and persistence are key when it comes to resolving any problem during the spring recoiling process.

Conclusion and Final Thoughts

In conclusion, recoiling a lawn mower spring is like wrestling with a feisty python with a sense of humor. It may seem like a daunting task, but with a steady hand, a determined mindset, and a sprinkle of wit, you can conquer this seemingly impossible feat. Remember, the key is to approach the spring with confidence, as if you were enticing it into a friendly game of tug-of-war.

Be prepared for some unexpected twists and turns, like a plot twist in a suspenseful novel. But fear not, for every twist unraveled, brings you one step closer to victory. Much like a chess match, strategize your moves, ensuring that each step is deliberate and calculated.

Consider it a dance, where you must perfectly sync your steps with the spring’s rhythm, avoiding any missteps that may send you spiraling into utter chaos. And when the moment of truth arrives, and you finally wrangle the spring back into place, relish in the triumph and bask in the glory of your accomplishment. Share your tale of bravery and wit with fellow lawn enthusiasts, regaling them with a tale that rivals the great heroic legends of old.

So, my fellow lawn warriors, fear not the mighty spring. Embrace it with open arms and a clever mind, for you have now become a master in the art of recoiling. As you step back and admire your freshly operating lawn mower, pat yourself on the back and allow a chuckle to escape your lips, knowing full well that you have outsmarted the very essence of mechanical chaos.

And remember, if all else fails, there’s always YouTube tutorials and a trusty neighborhood handyman to save the day. Happy recoiling!”

Summary of the steps and final tips for successful lawn mower spring recoiling

In conclusion, recoiling your lawn mower in the spring is an important maintenance step that ensures optimal performance throughout the cutting season. By following the steps outlined in this article, you can successfully recoil your lawn mower and address any common issues that may arise. Remember to always refer to your specific lawn mower’s manual for detailed instructions.

Additionally, regular maintenance, such as cleaning the air filter and sharpening the blades, will also contribute to a well-functioning lawn mower. By taking the time to properly care for your lawn mower, you can enjoy a beautiful, healthy lawn all season long. Happy mowing!


Why does a lawn mower spring need to be recoiled?
The spring in a lawn mower helps to power the pull start mechanism. If the spring becomes loose or weak, it may not be able to fully retract the pull start, making it difficult or impossible to start the mower.

What are the signs that a lawn mower spring needs to be recoiled?
Signs that a lawn mower spring needs to be recoiled include a pull start that doesn’t fully retract, a pull start that is difficult to pull or gets stuck, or a pull start that doesn’t engage the engine when pulled.

How often should a lawn mower spring be recoiled?
The frequency of recoiling a lawn mower spring depends on several factors, such as the usage and maintenance of the mower. Generally, it is recommended to inspect and potentially recoil the spring every 1-2 years or if the pull start shows any signs of trouble.

Can I recoil a lawn mower spring myself or do I need professional help?
Recoiling a lawn mower spring can be a challenging task and requires some mechanical knowledge. If you are comfortable working with small engine parts and have the proper tools, you can try recoiling the spring yourself. However, it is advisable to seek professional help if you are unsure or inexperienced.

What tools are needed to recoil a lawn mower spring?
To recoil a lawn mower spring, you will typically need a wrench or socket set, screwdrivers, pliers, and possibly a spring compression tool depending on the specific mower model. It is important to consult the manufacturer’s manual or seek professional advice for the correct tools and procedures.

Are there any safety precautions I should take when recoiling a lawn mower spring?
Yes, when recoiling a lawn mower spring, it is important to take appropriate safety precautions. This includes wearing protective gloves and eyewear, ensuring the mower is turned off and the spark plug wire is disconnected, and following the manufacturer’s safety guidelines.

What should I do if I am unable to recoil the lawn mower spring myself?
If you are unable to recoil the lawn mower spring yourself, it is best to seek professional assistance. They will have the necessary expertise to properly recoil the spring and ensure the mower is in proper working condition.

Rate this post

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top