How to Change a Bolens Weed Eater Head in 5 Easy Steps – Complete Guide

Are you tired of your Bolens weed eater head constantly wearing out, causing frustration in your yard work routine? Whether you’re a professional landscaper or simply a homeowner looking for a quick fix, changing out your weed eater head can make all the difference in the world. In this blog post, we’ll discuss the step-by-step process of changing out your Bolens weed eater head, giving you the ability to keep your yard looking pristine year-round. We’ll cover everything from the necessary tools to expert tips and tricks, ensuring that you have all the information you need to make the switch with ease.

So let’s get started and get your Bolens weed eater working at its best potential once again!

Gather Tools and Materials

If you’re looking to change the head on your Bolens weed eater, the first thing you’ll need to do is gather the necessary tools and materials. Ideally, you’ll want to have a pair of gloves to protect your hands, as well as a screwdriver, pliers, and a new weed eater head. It’s also a good idea to have a clean towel on hand to wipe away any dirt or debris.

Depending on the specific model of Bolens weed eater you have, you may need other tools as well. Be sure to consult the owner’s manual or do some online research before starting the process to ensure you have everything you need. Remember, having the right tools is key to a successful and safe DIY project.

Tools: screwdriver, pliers, replacement head

Before starting any project that involves repairs, it’s important to gather the necessary tools and materials. For this particular project, you’ll need a screwdriver, pliers, and a replacement head. The screwdriver will be the primary tool used to remove the old head and install the new one.

The pliers may come in handy if the head is particularly stubborn and difficult to remove. Be sure to select a replacement head that is the same size and shape as the old one, to ensure a proper fit. As with any project, having the right tools and materials on hand will not only make the job easier, but will also reduce the risk of potential damage or injury.

So, before you start, take a few minutes to gather everything you need, and you’ll be well on your way to a successful repair.

Materials: Safety gloves, safety goggles, workbench

As with any DIY project, it’s essential to gather all the necessary tools and materials before starting. For this particular project, you’ll need safety gloves and safety goggles to protect your hands and eyes from any potential hazards. These items are a must for every DIY project, regardless of the task at hand.

In addition, you’ll need a sturdy workbench to work on, preferably one that can withstand the weight of the materials you’ll be using. Don’t skimp on the quality of your workbench, as this will ensure your project is completed safely and efficiently. Once you have all your tools and materials set up and ready to go, you’re one step closer to completing your DIY project successfully.

Remember, safety should always be your top priority, so make sure you have everything you need to stay protected.

Removing the Old Head

To begin changing the Bolens weed eater head, the first step is to remove the old head. This can be done by locating the locking mechanism on the head and pressing or twisting it to release the spool. Then, remove the spool and any remaining cutting line.

Next, using a wrench or pliers, unscrew the old head from the weed eater. It may be tight, so use force as needed while being careful not to damage the engine or other parts. Once the old head is removed, it’s time to install the new one.

But first, it’s important to clean any debris or dirt from the area to ensure a proper fit and functioning of the new head. By following these steps, you’ll be well on your way to a smoothly running Bolens weed eater with a newly installed head.

Disconnect spark plug, turn power off, place lock plate on workbench.

Removing the old head of your lawnmower can be a daunting task, but with the right tools and instructions, it can be done with ease. The first step is to disconnect the spark plug and turn off the power to the machine. Safety should always come first, so make sure to wear protective gloves and goggles throughout the process.

Once you have done that, it’s time to move on to the lock plate. Place the lock plate on your workbench and then proceed to remove the bolts that hold the old head in place. This can be done using a socket wrench or a set of pliers, whichever feels more comfortable for you.

Remember to keep track of all the bolts and screws you remove so that you can replace them with the new head later on. With the bolts removed, you can now carefully lift the old head off the engine block. Be careful not to lose any small parts or screws that may come loose in the process.

Congratulations! You have now successfully removed the old head from your lawn mower.

Remove cutting head by pressing tabs on either side and pulling it away from trimmer.

When it comes to replacing the cutting head on your trimmer, it’s essential to know how to remove the old head first. To do this, locate the tabs on either side of the head. Press them both at the same time and pull the head away from the trimmer.

Be careful not to pull too hard or too quickly as you don’t want any parts to break. Once the old cutting head is removed, you can look at it to see if it needs cleaning or repair before installing the new head. Remember, removing the old head is only one step in the process of replacing it, and it’s crucial to follow the manufacturer’s instructions carefully for the best results.

With our easy-to-follow guide on removing the old head, you’ll be well on your way to replacing the head and improving your trimmer’s cutting power.

Remove spring and spool below the cutting head.

If you’re looking to replace your weed eater head, the first step is to remove the old one. This involves removing the spring and spool below the cutting head. To do this, locate the tabs on either side of the head and depress them to release the cover.

This should expose the spool underneath. Remove any remaining line from the spool and set it aside. Then, using your fingers, gently tug on the spool until it comes out of its housing.

With the spool removed, you should be able to see the spring underneath. Carefully remove this as well, being sure not to lose it in the process. Once the spring and spool are removed, you can discard or recycle the old head and move on to installing your new one.

By following these simple steps, you can easily remove the old head and get your weed eater ready for a fresh start.

Installing the New Head

Changing the head on your Bolens weed eater isn’t as difficult as you might think. First, you’ll need to remove the old head by unscrewing it from the trimmer. Make sure you keep track of any washers or other small parts that may come loose during this process.

Next, take the new head and thread it onto the trimmer until it’s tight. You may need to use a wrench or pliers to help with this part. Lastly, reattach any washers or other parts that you removed earlier and give the head a few test spins to ensure that it’s securely attached.

With these simple steps, you’ll be able to get your Bolens weed eater up and running again in no time.

Fit spring onto the new head and then place on trimmer shaft.

Installing the new head on a trimmer shaft can seem like a daunting task, but with a few simple steps, it can be done in no time. Start by selecting a new head that’s compatible with your trimmer shaft. Once you have the right part, it’s time to install it.

To begin, take the spring that comes with the replacement head and fit it over the spindle of the trimmer shaft. Make sure the spring is secure and in place. Now, take the new head and screw it onto the spindle.

It should fit on snugly and spin freely. You may need to use a wrench or pliers to tighten it securely, but be careful not to overtighten it. Once the head is on, give it a quick test spin to make sure it’s working properly.

With these simple steps, you can easily install a new head on your trimmer shaft, and get back to trimming your lawn in no time.

Tighten the retaining nut using pliers or a wrench.

If you’re looking to install a new shower head, the process is relatively straightforward, and one of the final steps is to tighten the retaining nut using pliers or a wrench. This nut is what keeps the shower head securely in place, so it’s essential to tighten it sufficiently to avoid any leaks. Once you’ve connected the new head to the water supply and made sure it’s flush against the wall, you can use pliers or a wrench to tighten the nut.

It’s important not to over-tighten the nut, as this could damage the shower head or the plumbing. Instead, tighten it just enough so that it feels snug, and then double-check that there are no leaks. By following these steps, you can enjoy a steady and reliable stream of water from your new shower head.

Reattach safety equipment and test trimming.

Now that you’ve removed the old head and cleared any debris from around the base, it’s time to install the new head. Begin by following the manufacturer’s instructions for attaching the new head to the trimmer. Once it’s securely in place, reattach any safety equipment, such as the guard and handle, that you had to remove for the head replacement.

Make sure all attachments are properly secured in place. Before beginning your trimming task, we recommend testing the new head to ensure it’s working smoothly. Take a moment to turn on the trimmer and gently pull the throttle to see how the new head performs.

If everything looks good, you’re now ready to get back to your outdoors work with your newly installed trimmer head!

Conclusion

Congratulations on successfully changing your Bolens weed eater head! You’ve shown that with the right tools, a little patience, and the willingness to get a little dirty, anyone can conquer even the most stubborn yard work. Remember, when it comes to tackling weeds and overgrown grass, the only thing standing between you and a beautifully manicured lawn is a good weed eater head. So, go forth and conquer, fearless yard warrior!”

FAQs

What type of weed eater head does a Bolens use?
Bolens weed eaters typically use a bump feed head that can be easily replaced.

How often should I change the head on my Bolens weed eater?
It is recommended to change the head on your Bolens weed eater annually or whenever it becomes damaged.

Can I use a universal weed eater head on my Bolens?
Yes, as long as the head is compatible with your Bolens weed eater model.

How do I remove the old head on my Bolens weed eater?
Refer to the owner’s manual or online tutorials for specific instructions on how to remove the head from your Bolens weed eater.

Which replacement head is the best for my Bolens weed eater?
There are many different types of replacement heads available, such as a fixed line head or a pivotrim hybrid head. Choose the head that functions best for your needs.

How do I install the new head on my Bolens weed eater?
Refer to the owner’s manual or online tutorials for specific instructions on how to install the new head on your Bolens weed eater.

Can I use different types of line with my Bolens weed eater head?
It is important to use the recommended line size and type for your specific Bolens weed eater head to avoid damage or injury.